Oil Pan

OIL PAN






Install or Connect
1. Oil pan gasket (I).
- Apply sealant GM p/n 12345739 where the oil pan gasket tabs seat on rear main bearing cap groove.

2. Oil pan (1).
3. Oil pan reinforcements (10), nuts (11), bolts (12 and 14) and studs (13).
- Tighten Nuts (11) to 10 Nm (89 lb. in.).
- Tighten Two rear bolts (14) to 25 N.m (18 lb. ft.).
- Tighten Remaining bolts and studs (12 and 13) to 10 N.m (89 lb. in.).