Engine Front Cover

ENGINE FRONT COVER





Tool Required: J 34995 Oil Seal Installer


Disassemble
1. Crankshaft position sensor screws (56).
2. Crankshaft position sensor (57).
3. Front cover oil seal (58).
- Pry out carefully with a suitable tool.


Clean
^ Engine front cover mating surfaces.


Inspect
^ Front cover oil seal (58) for damage.
^ Cracks or nicks.


Assemble
1. Front cover oil seal (58) using J 34995.
2. Crankshaft position sensor (57).
3. Crankshaft position sensor screws (56).
Tighten Sensor screws (56) to 10 N.m (89 lb. in.).