Camshaft Bearings

CAMSHAFT BEARINGS





Tool Required: J 33049 Camshaft Bearing Remover/Installer


Remove or Disconnect
1. Camshaft cover bolts (77), cover (76) and gasket (75).
2. Camshaft bearings (101).
A. Select the proper expander assembly and driving washer.
B. Assemble J 33049. Tighten the expander assembly snug with the camshaft bearing.
C. Drive out bearings.


Important: Camshaft bearings (101) must not be re-used after they have been removed.