Cruise Control Module: Service and Repair

Fig. 45 Cruise Control Module Removal:

1. Remove accelerator control cable splash shield screws and bolts, then splash shield.

2. Remove left hand front bumper fascia lower deflector, Fig. 45 as follows:

a. Remove retainer, then bolts and screws from front lower deflector and wheelhouse panel liner.

b. Remove bells and screws from front lower deflector and radiator air lower deflector.

c. Remove retainers from front lower deflector and radiator lower baffle.

d. Remove front lower deflector by sliding outward from radiator lower deflector and wheelhouse panel liner.

3. Remove cruise control cover to access connectors, then disconnect electrical connector from cruise control module.

4. Disconnect cruise control cable from module, then remove bolts and screws.

5. Remove module with bracket Fig. 45, then module from bracket.


6. Reverse procedure to install noting the following:

a. Tighten cruise control module to bracket screws and bolts to 53 ft lbs.

b. Tighten cruise control module to left engine compartment inner side rail screws and bolts to 89 ft lbs.

c. Tighten radiator air lower deflector and front lower deflector screws and bolts to 49 ft lbs.

d. Tighten accelerator cable splash shield screws and bolts to 17 ft-lbs.