M/T - Revised Flywheel Torque Specifications

Group Ref.: Engine Mechanical

Bulletin No.: 336109

Date: November, 1993

SERVICE MANUAL UPDATE

SUBJECT:
SECTION 6A7 - REVISED FLYWHEEL TORQUE SPECIFICATIONS

MODELS:
1993 BUICK SKYLARK
1993 CHEVROLET CORSICA/BERETTA
1993 OLDSMOBILE ACHIEVA
1993 PONTIAC GRAND AM

This bulletin applies to the above vehicles equipped with 2.3L engines:

VIN A - RPO LGO

VIN D - RPO LD2

VIN 3 - RPO L40

The following represents revised information for flywheel installation in Section 6A7 on page 52 for Oldsmobile and Buick, page 45 for Pontiac and page 47 for Chevrolet in the 1993 "L" and "N" Service Manuals.

The torque specification for the flywheel bolts to crankshaft is 30 N-m (22 lbs.ft.) then rotate bolts 45 degrees using J 36660.