Power Steering Pump Pulley Replacement

Remove/Install Power Steering Pump Pulley:

Tools Required:
J 25034-B Power Steering Pulley Remove
J 25034-B Installer; or
J 36015 Power Steering Pulley Installer

Remove or Disconnect

1. Belt from pulley
2. Pump from engine for tool clearance.
^ It is not necessary to remove the pressure and return lines from the pump.
3. Pulley using J 25034-B.

Install or Connect

1. Pulley using J 25033-B or J 36015.

Important
^ Face of pulley hub must be flush with pump drive shaft.
^ Do not use arbor press to install pulley.

2. Pump to engine.
3. Belt on pulley.
4. Bleed power steering system if pump was removed from engine.