Pictorial Views

ALDL Connector:

ALDL CONNECTOR

Battery Location:

1 = POSITIVE BATTERY CABLE
2 = HEAT SHIELD
3 = BATTERY
4 = NEGATIVE BATTERY CABLE
5 = CAPS

Pictorial View:

1 = IGNITION MODULE
2 = IGNITION MODULE CONNECTOR
3 = GENERATOR
4 = GENERATOR FIELD CONNECTOR
5 = MAP SENSOR CONNECTOR
6 = COOLANT TEMPERATURE SWITCH CONNECTOR
7 = COOLANT TEMPERATURE SENDER
8 = EVRV CONNECTOR
9 = PURGE SOLENOID CONNECTOR
10 = PURGE SOLENOID
11 = MAP SENSOR
12 = BATTERY POSITIVE CABLE
13 = STARTER SOLENOID
14 = STARTER MOTOR
15 = FUSIBLE LINK
16 = STARTER SOLENOID CABLE
17 = ECM HARNESS ASSEMBLY

Pictorial View:

1 = #2 STUD
2 = TWO POWER GROUNDS
3 = REDUNDANT GROUND CABLE
4 = 47 N-m (35 ft lb)
5 = DIRECT FIRE GROUND
6 = NEGATIVE CABLE
7 = #1 STUD
8 = CONNECTOR RETAINER
9 = NEUTRAL SAFETY SWITCH CONNECTOR
10 = ECM-ENG HARNESS
11 = ADDITIONAL HARNESS FOR UB3 OPTION
12 = NEUTRAL SAFETY SWITCH UB3 OPTION
13 = DIRECT FIRE LEAD
14 = DISASSEMBLY
15 = DIRECT FIRE PLUG CONNECTOR
16 = DIRECT FIRE MODULE

Pictorial View:

1 = OXYGEN SENSOR BREAKOUT LEAD
2 = OXYGEN SENSOR LEAD CONNECTOR
3 = OXYGEN SENSOR
4 = ECM/ENGINE HARNESS
5 = ENGINE MOUNT BRACKET
6 = HARNESS CLIPS
7 = 25 N-m (18 ft lb)
8 = SPEED SENSOR CONNECTOR
9 = SPEED SENSOR
10 = EWH NEGATIVE GROUNDS
11 = SPARK KNOCK SENSOR

Pictorial View:

1 = ELECTRICAL RELAY CENTER
2 = NUTS TO BODY STUDS
3 = SHOCK TOWER
4 = HYDRAULIC CLUTCH LINE
5 = MAT SENSOR LEAD
6 = MAF/MAT SENSOR
7 = A/C CLUTCH SWITCH
8 = A/C COMPRESSOR
9 = HIGH PRESSURE SWITCH (RED)
10 = LOW PRESSURE SWITCH (BLACK)
11 = ECM WIRING HARNESS
12 = ECM BREAKOUT LEAD
13 = A/C CLUTCH SWITCH LEAD