Coupe

Door Trim Panel:

Tool Required:
J 24595-C Door Trim Pad and Garnish Clip Remover

Remove or Disconnect

1. Cover.
2. Retractor cover.
3. Handle bezel.
4. Power window and door switch assembly.
5. Window regulator handle, if present.
6. Door courtesy lamp.
7. Speaker switch.
8. Screws.
9. Remote mirror control, if present.
10. Wire harness through door openings.
11. Door trim panel using J 24595-C to disengage fasteners from boles in door inner panel.

Install or Connect

1. Wire harnesses, if present, through openings in trim panel.
2. Speaker switch.
3. Door courtesy lamp.
4. Power window and door switch assembly to wire harness, if present.
5. Trim panel to door by aligning fasteners on trim panel to holes in door inner panel and pressing trim panel to door until fasteners are fully engaged.
6. Screws.

Tighten
^ Screws to 1 N.m (9 lb in).

7. Remote mirror control, if removed.
8. Window regulator handle, if removed.
9. Handle bezel.
10. Retractor cover.
11. Cover.