Less A/C

1. Disconnect battery ground cable.
2. Remove wiper arm attaching nuts, then slide arms off splined shafts.
3. Remove four wind deflector attaching screws and the deflector halves.
4. Remove washer nozzle hoses from washer nozzles.
5. Remove seal from dash panel and clip, then the right side wiper bearing attaching nut.
6. Remove water deflector, then disconnect electrical connector from blower motor housing.
7. Remove blower motor housing attaching screws and the housing.
8. Remove housing cover attaching cover screws and the cover.
9. Remove blower motor from housing.
10. Reverse procedure to install.