Troubleshooting Hints

TRY THE FOLLOWING CHECKS BEFORE DOING THE SYSTEM CHECK:
1. Check GAGES Fuse by observing the Malfunction Indicator Lamp with the Ignition Switch in RUN and the engine OFF.
2. Check ground G100 by operating the Blower Motor.
3. If the BRAKE Indicator does not light for a particular condition, check the suspect switch for battery voltage at the TAN/WHT (33) terminal and a good ground circuit. If wires are good to suspect switch, replace suspect switch.
^ Go to System Check for a guide to normal operation. System Check
^ Go to System Diagnosis for diagnostic tests. System Diagnosis