Ignition Lock Cylinder

Fig. 1 Cylinder Lock Removal:

WARNING:
On models equipped with Airbags, Refer to Air Bags (Supplemental Restraint Systems) Service and Repair Disarming procedures before performing any repair. Service and Repair

1. Remove steering wheel. Refer to Steering and Suspension / Steering / Steering Wheel.
2. Remove turn signal switch. Refer to Lighting and Horns / Turn Signals / Turn Signal Switch. Service and Repair
3. Remove buzzer switch.
4. Turn lock cylinder to Run position, then remove the lock cylinder retaining screw and lock cylinder, Fig.1.
5. To install, rotate lock cylinder to stop while holding housing.Align cylinder key with keyway in housing, then push cylinder into housing until fully seated.
6. Install lock cylinder retaining screw.
7. Install buzzer switch, turn signal switch and steering wheel.