Manifolds

LEFT
1. Install the exhaust manifold gasket to the cylinder head.
2. Install the manifold studs and the nuts.
^ Tighten the studs and the nuts to 30 Nm (22 ft. lbs.).





3. Connect the spark plug wires to the spark plugs.





RIGHT
1. Install the exhaust manifold gasket to the cylinder head.
2. Install the manifold studs.
^ Tighten the studs to 30 Nm (22 ft. lbs.).





3. Install the heated oxygen sensor lead.

NOTE: Inspect the EGR outlet pipe for leaks during installation. If leaks are present, replace the EGR adapter assembly.





4. Install the EGR outlet pipe to the manifold.
5. Install the EGR outlet pipe to the manifold bolt.
^ Tighten the bolt to 29 Nm (21 ft. lbs.).