Timing Chain and Sprockets Installation

TOOLS REQUIRED
J 36660 Torque Angle Meter or equivalent.





PROCEDURE
1. Assemble the timing chain on the sprockets. Ensure that the timing marks are in the closest together position.





2. Install the timing chain and the crankshaft sprocket.
3. Install the camshaft sprocket.

CAUTION: This bolt is designed to permanently stretch when tightened. The correct part number fastener must be used to replace this type of fastener. Do not use a bolt that is stronger in this application. If the correct bolt is not used, the parts will not be tightened correctly. The system or the components may be damaged.

4. Install the camshaft sprocket bolt.
^ Tighten the bolt to 100 Nm (74 ft. lbs.). Use the J 36660 in order to tighten the bolt an additional 90 degrees.
5. Install the timing chain damper.