Operation CHARM: Car repair manuals for everyone.

Valve Rocker Arm Cover installation





LEFT
1. Install the rocker arm cover.
2. Clean any debris from the bolt threads.
3. Apply thread lock compound or the equivalent to the bolt threads.
4. Install the rocker arm cover bolts.
^ Tighten the bolts to 10 Nm (89 inch lbs.).
5. Install the Ignition Control Module (ICM) bracket.
6. Install the engine lift bracket.





RIGHT
1. Install the rocker arm cover.
2. Apply thread lock compound or the equivalent to the bolt threads.
3. Install the rocker arm cover bolts.
^ Tighten the bolts to 10 Nm (89 inch lbs.).
4. Install the spark plug wire.
5. Install the engine lift bracket.