Front Alignment Specifications
Caster Angle, DegreesLimits +4.1 to +4.9
Desired 4.4
Camber Angle, Degrees
Limits - .1 to +.9
Desired +0.4
Total Toe, Degrees -.2 to +.2
Ball Joint Wear
Lower [01]
Upper [03]
[01] Wear is indicated by position of 1/2 inch diameter nipple in which grease fitting is threaded. If nipple is flush or inside cover surface, replace ball joint.
[03] Deflection on dial indicator, when positioned against wheel rim, should not exceed .125 inch while moving top of wheel in and out.