Knock Sensor (KS) Module

PCM With Knock Sensor Module:

Removing Knock Sensor Module From PCM:

REMOVE OR DISCONNECT
1. Negative battery cable.
2. Powertrain Control Module (PCM) from mounting bracket. (
3. Knock sensor (KS) module access cover.
4. Knock sensor module.


INSTALL OR CONNECT

NOTICE: To prevent possible electrostatic discharge damage to the PCM and KS module, Do Not touch the connector pins or soldered components on the circuit board.

1. Knock senor module.
2. Access cover.
3. PCM to mounting bracket.
4. Negative battery cable.