Coil Replacement Procedure

1. Obtain THEFTLOCK code from customer.

2. Disconnect negative battery cable.

3. Remove steering wheel.

4. Remove steering wheel redundant control/supplemental inflatable restraint coil following applicable Service Manual instructions. Coil WILL NOT be reused.

5. Install NEW steering wheel redundant control/supplemental inflatable restraint coil following applicable Service Manual instructions.

6. Reinstall steering wheel.

7. Reconnect negative battery cable.

8. Enter THEFTLOCK code following Service Manual instructions, then reset radio stations.

9. Proceed with step 4 of "Wire Harness Replacement Procedure".