Deactivation

To deactivate the Delco Loc II feature the following example shows how to deactivate the Delco loc II feature (once it has been activated) with the user code "123456":

1. Turn the ignition lock cylinder to the "RUN" or "ACCESSORY" position and the radio/CD player off.
2. Press preset 1 and 4 and "SEC" will appear on the display.
3. Press the "SET" button "000" will appear on the display.
4. Recall the first digit of the code by pressing the "SEEK" button until the correct digit appears. "100"
5. Recall the second and third digits by rotating the "Tune" knob until the desired digits appear."123"
6. Press the "Tune" button to recall the last three digits into memory. "000" will appear on the display.
7. Recall the fourth digit of the code by pressing the "SEEK" button until the desired digit appears. "400"
8. Recall the fifth and sixth digits by again rotating the "Tune" knob until the desired digits appear. "456"
9. Press the "AM/FM" button and "___" will appear on the display indicating the sequence was successful if "SEC" appears, the disabling was unsuccessful and must be repeated.

The Delco Loc II feature may be left deactivated or the same or a new user code may be entered to reactivate the Delco Loc II feature.