Drive Belt: Service and Repair

Serpentine Drive Belt:

Tools Required:
J 39914 Serpentine Drive Belt Tensioner Wrench

A single belt is used to drive all engine accessories. A spring-loaded tensioner assembly provides automatic belt adjustment.

Remove or Disconnect

1. Negative battery cable.
2. Rotate belt tensioner using J 39914.
3. Remove serpentine drive belt from generator pulley.
4. Support engine by the oil pan.
5. Engine mount assembly from engine mount bracket support.
6. Auxiliary bracket.
7. Lower engine enough to remove serpentine drive belt.

Install or Connect

1. Rotate belt tensioner using J 39914.
2. Serpentine drive belt.
3. Auxiliary bracket and fasteners.

Tighten
^ Fasteners to 50 Nm (37 lb. ft.).

4. Engine mount assembly to engine mount bracket support bolts.
5. Remove floor jack.
6. Negative battery cable.