Enabling the SIR System

WARNING: The diagnostic energy reserve module or sensing and diagnostic module (DERM/SDM) can maintain enough voltage to cause air bag deployment for up to two minutes after the ignition switch is turned off and the battery is disconnected. Servicing the SIR system during this period may result in accidental deployment and personal injury.

1. Turn ignition key to the LOCK position and remove key.
2. Working through trap door located in the lefthand sound insulator, connect Connector Position Assurance (CPA) and yellow 2-way connector at base of steering column.
3. Install AIR BAG fuse.
4. Turn ignition key to the RUN position and verify that the AIR BAG warning lamp flashes seven times and the turns off. If lamp does not operate as specified, refer to System Diagnosis.