Clutch: Testing and Inspection

PRELIMINARY CHECKS

Part 1 Of 2:

Part 2 Of 2:

A large percentage of clutch and manual transaxle problems are revealed by shifting difficulties such as high shift effort, gear clash, gear grinding, or transaxle blackout. Use the "Clutch Diagnosis Chart" to assist with clutch diagnosis.

NOTICE: Carefully clean the top and sides of the reservoir before opening to prevent contamination of the system with dirt, water or other foreign material. Remove the reservoir diaphragm before adding fluid. Carefully replace the diaphragm, cover gasket and cover after filling.

If the reservoir requires any fluid, check the hydraulic system components for leakage. Remove the rubber boots from the cylinder and check for leakage past the pistons. A slight wetting of the surfaces is acceptable. Replace the system if excessive leakage is evident.