Ignition Control Module: Service and Repair

Ignition Control Module And Coil Packs:

Ignition Coil Assembly:

REMOVE OR DISCONNECT
1. Negative battery cable,
2. 6-way connector, 3-way connector and 2-way connector at ignition control module.
3. Spark plug wires from ignition coils.
4. 6 screws securing ignition coils to ignition control module.
5. Disconnect coils from ignition control module.
6. Ignition control module.


INSTALL OR CONNECT
1. Ignition coils to ignition control module.
2. 6 screws, torque to 4-5 Nm (40 lb. in.).
3. Plug wires.
4. 6-way connector, 3-way connector and 2-way connector to module.
5. Negative battery cable.