Troubleshooting Hints

PERFORM BEFORE BEGINNING SYSTEM DIAGNOSIS:
1. Check CIG Fuse by visual inspection.
2. If HORN fuse blows when replace, check CKT 40, CKT 29 and Horns for a short to ground.
^ Check for a broken (or partially broken) wire inside of the insulation which could cause system failure but prove "GOOD" in a continuity/voltage check (refer to "General Troubleshooting Procedures,"). Diagnostic Aids
^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems (refer to "General Troubleshooting Procedures,").
^ Refer to System Diagnosis. Component Tests and General Diagnostics
^ Refer to Steering and Suspension for Steering Wheel and Column disassembly information. Steering Column