Suspension Control - Computer Command Ride (CCR)

Wiring Diagram:

TEST CONDITIONS
Check driver select switch input pins for valid input combination: (1) pin C5 ("Touring" input) grounded and pin C6 ("Perform" input) open, or (2) pin C5 open and pin C6 grounded.

FAULT CONDITIONS
If both switch inputs are open or both are closed to ground (active) for more than 3.0 seconds, then turn on both position L.E.D.'s and set code.

ACTION TAKEN
Record driver select switch error and turn on both L.E.D.'s.
Default to "Touring" setting until a valid switch input combination is detected.

DESCRIPTION
A driver select switch input error is detected when both switch inputs (connector pins C5 and C6) are asserted (grounded) or both are unasserted (open) for more than 3.0 seconds consecutively. IF a driver select switch input error is detected, the system will default to the "Normal" switch setting activate both position L.E.D.'s and set code 33.