Suspension Control - Computer Command Ride (CCR)

Wiring Diagram:

TEST CONDITIONS
Check for vehicle speed signal during when vehicle movement is suspected.

FAULT CONDITIONS
If vehicle speed signal is not detected for 20 seconds, followed by 5 or more transitions in accelerator switch input, set code.

ACTION TAKEN
Record vehicle speed signal error, Turn on both driver select switch L.E.D.'s, System will continue to default to zero speed damping (sport mode).

DESCRIPTION
A vehicle speed signal error occurs when the Control Module detects 5 or more transitions in the lateral accelerator switch input after 20 or more seconds without a vehicle speed input. If a fault is detected, the system will set error code 34 and activate the error lamp.

NOTES ON INTERMITTENTS
Refer to Lateral Accelerator Switch Error (Code 32), Suspension Control - Computer Command Ride (CCR) and to diagnostics in Computers and Control Systems. Testing and Inspection

Also refer to Notes on Intermittents. Notes on Intermittents