Radio/Stereo: Service and Repair

1. Disconnect battery ground cable.
2. Through glove compartment, disconnect radio and antenna electrical connector.
3. Pull ashtray outward, push downward, then pull ashtray rearward to remove.
4. Remove instrument panel center trim bezel four attaching screws, then bezel.
5. Through instrument panel ashtray cutout, remove one cross recess screw below rear of radio.
6. Remove radio four attaching screws, then pull radio and mounting brackets rearward.
7. Remove radio mounting bracket to radio five attaching screws, if required, then radio.
8. Reverse procedure to install.