Fuel Tank Pressure Sensor: Service and Repair

REMOVE AND DISCONNECT
1. Negative (-) battery cable.
2. Remove the fuel tank from vehicle.
3. Fuel tank pressure sensor electrical connector.
4. Two bolts and Fuel Tank Pressure sensor from fuel tank.

INSTALL OR CONNECT
1. Fuel tank pressure sensor to fuel tank; secure with two bolts.

NOTE: Install fuel tank pressure sensor on the fuel tank with the sensor terminals facing the fuel level sensor (gauge) side.

Tighten

^ Fuel tank pressure bolts to 1.2-2.0 Nm (1.0 lb ft).

2. Fuel tank pressure sensor electrical connector.
3. Negative (-) battery cable. Tighten negative (-) battery cable-to-negative (-) battery terminal retainer to 15 Nm (11 lb ft).