Seat Belt Webbing - Twists
File In Section: 10 - BodyBulletin No.: 53-16-12B
Date: March, 1996
Subject:
Twist in the Seat Belt Webbing Between the Pillar Guide Loop and the Retractor
(Untwist/Fold Webbing to Pass Through the Guide Loop)
Models:
1995-96 Chevrolet Cavalier Sedan
1995-96 Pontiac Sunfire Sedan
This bulletin is being to remove the "N" car. Please discard Corporate Bulletin Number 53-16-12A (Section 10 - Body).
Condition
Some owners may comment on a twist in the front seat belt webbing between the pillar guide loop and the retractor.
Correction
DO NOT remove the guide loop cover, center pillar upper trim panel, or retractor to correct the twist in the seat belt webbing.
Instead, untwist the seat belt and fold the webbing to allow the twist to pass through the seat belt guide loop.
The seat belt webbing should be flat without any twists.
Warranty information
For vehicles repaired under warranty, use:
Labor Operation Labor Time
C9050/51 Use published labor operation time.