SIR Coil Assembly - Centering

Centering Coil Assembly:

SIR Coil Assembly:

Perform the following steps to center Coil Assembly:

A. Remove coil assembly.

B. Hold coil assembly with clear bottom up to see coil bottom.

NOTE: There are two different styles of coils. One rotates clockwise and the other rotates counter-clockwise.

C. While holding coil assembly, depress spring lock to rotate hub in direction of arrow until it stops.

D. The coil ribbon should be wound up sung against center hub.

E. Rotate coil hub in opposite direction approximately two and a half (2 1/2) turns. Release spring lock between locking tabs adjacent to arrow (as shown).