Troubleshooting Hints - Without Keyless Entry Only

PERFORM BEFORE BEGINNING SYSTEM DIAGNOSIS:
1. If vehicle is equipped with Keyless Entry, refer for Power Door Lock diagnosis. Keyless Entry
2. Check the PWR ACC Fuse in I/P Fuse Block. If open, refer to Diagnostic Chart #4. Chart 4 PWR Acy Fuse Repeatedly Blows Whenever Ign Is on
3. Check for poor connection at G302.
^ Check for a broken (or partially broken) wire inside of the insulation which could cause system failure but prove "GOOD" in a continuity/voltage check (refer to "General Troubleshooting Procedures,"). Diagnostic Aids
^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems (refer to "General Troubleshooting Procedures,").
^ Refer to "System Diagnosis".System Diagnosis - Without Keyless Entry Only