Troubleshooting Hints

PERFORM BEFORE BEGINNING SYSTEM DIAGNOSIS:

NOTE:
^ Check Power Window Circuit Breaker by operating Power Windows (if equipped).
^ Check PWR ACC Fuse by operating Power Locks.
^ Check that top is not binding or folding unevenly.
^ Check for broken (or partially broken) wire inside of the insulation which could cause system failure but prove "GOOD" in continuity/voltage check (refer to "General Troubleshooting Procedures,"). Diagnostic Aids
^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems (refer to "General Troubleshooting Procedures,").