General

Bore Roundness 0.025 mm (0.0009 inches)
Bearing Thickness 1.500-1.508 mm (0.0590-0.0593 inches)
Bearing I.D. 30.019-30.061 mm (1.1819-1.1835 inches)
Endplay 0.185-0.455 mm (0.0073-0.0179 inches)
Housing Flatness Maximum 0.076 mm (0.0030 inches)
Housing Bore 33.025-33.050 mm (1.3001-1.3021 inches)
Journal Roundness Maximum 0.005 mm (0.0002 inches)
Journal Taper 0.000-0.010 mm (0.000-0.0004 inches)
Shaft Journal O.D. 29.950-29.975 mm (1.1791-1.1801 inches)
Shaft Groove Width 3.23-3.40 mm (0.127-0.134 inches)
Thrust Plate Thickness 2.945-3.045 mm (0.1159-0.1199 inches)