Overhaul Procedure Steps

NOTE: This article lists the sequential steps necessary to overhaul the transmission.
^ For the specific step listed below, refer to the hyperlink for that step.
^ For the complete list of procedures, refer to "Repair Instruction". Repair Instructions




Overhaul Procedure:

Disassembly. Disassembly
[ ] Transaxle Case Disassembly. Transaxle Case Disassembly
[ ] Input Shaft Disassembly. Input Shaft Disassembly
[ ] Output Shaft Disassembly. Output Shaft Disassembly
[ ] Differential Case Disassembly. Differential Case Disassembly

Cleaning and Inspection. Cleaning and Inspection
[ ] General Information. General Information
[ ] Gears. Gears
[ ] Thrust Washers. Thrust Washers
[ ] Clutch and Differential Housing. Clutch and Differential Housing
[ ] Bearings. Bearings
[ ] Synchronizers. Synchronizers
[ ] Detent Springs. Detent Springs
[ ] Shift Forks. Shift Forks

Assembly. Assembly
[ ] Input Shaft Assembly. Input Shaft Assembly
[ ] Output Shaft Assembly. Output Shaft Assembly
[ ] Differential Case Assembly. Differential Case Assembly
[ ] Transaxle Case Assembly. Transaxle Case Assembly