Keyless Entry Module: Service and Repair

Module Mounting And Wiring:

REMOVE OR DISCONNECT
1. Negative battery cable.
2. Open rear compartment.
3. Left inner trim panel.
4. One electrical connector.
5. Remove push pins.
6. Module.

INSTALL OR CONNECT
1. Module to rear compartment brace.
2. Push pins to brace.
3. Electrical connector.
4. Rear compartment trim.
5. Close rear compartment.
6. Negative battery cable.
7. Program to match transmitter(s).

Refer to "Remote Keyless Entry Module Programming".