General Description

The instrument panel allows removal of all control switches, instruments and gages from the driver's side of the instrument panel. Trim covers are held in place by screws and clips...p The cluster housing contains the speedometer, gages, indicators, and instrument panel bulbs and is attached to the I/P pad.

NOTICE: When replacing a speedometer or odometer assembly, the federal law requires the odometer reading of the replacement unit to be set to register the same mileage as the prior odometer. If the same mileage cannot be set, the law requires that the replacement odometer be set to zero and a label be installed on the driver's door frame to show previous odometer reading and the date of replacement.

BASE AND GAGE CLUSTERS
The clusters contain an electric analog speedometer, stepper motor driven season and trip odometer (gage cluster only), temperature gage, oil pressure gage, fuel gage, tachometer (gage cluster only) and indicator lamps. The vehicle speed sensor (p.m. generator) is located on the transaxle.

The indicator lamps include:
^ Air Bag
^ ETS (Electronic Traction Control)
^ Low Coolant
^ Fasten Safety Belts
^ Check Engine
^ Up Shift (manual transaxle only)
^ Brake
^ Anti-Lock
^ High Beam
^ Left Turn
^ Right Turn
^ Daytime Running Lamps
^ Volts
^ Check Gages
^ VTD Theft System (Z24 and Pontiac GT)

The serviceable parts of this cluster include the lens, bulbs and sockets as shown in figures 11 and 12. All other "Tell-Tale" lights are not serviceable.
If any other parts require servicing, the cluster should be sent to an authorized instrument cluster service center.