Front Hub and Bearing

FRONT HUB/BEARING






^ Tools Required:
- J 28733-A Front Hub Spindle Remover

REMOVE OR DISCONNECT
1. Drive axle.
2. Brake caliper bolts, and support caliper.
3. Rotor.
4. Hub and bearing assembly.
5. Hub and bearing assembly from steering knuckle.
6. Hub and bearing.

INSTALL OR CONNECT
1. Hub and bearing assembly to steering knuckle.
2. Hub and bearing assembly bolts.
^ Tighten hub and bearing assembly bolts to 95 Nm (70 lb ft).
3. Rotor.
4. Brake caliper and bolts.
5. New hub and bearing into steering knuckle.
6. Drive axle.
7. Check front wheel alignment.