Coolant Level Sensor: Service and Repair

REMOVAL PROCEDURE
1. Drain and recover the coolant.
2. Coolant hoses from radiator surge tank.
3. Low coolant connector.
4. Radiator surge tank bolt and tank.
5. Low coolant switch from tank.

INSTALLATION PROCEDURE
1. Low coolant switch to tank.
2. Place tank in vehicle. Tighten bolt to 10 Nm (89 inch lbs.).
3. Coolant hoses to radiator surge tank.
4. Low coolant connector.
5. Fill cooling system at radiator surge tank to appropriate full mark.
6. Inspect for leaks.