Brake and Clutch Pedal Switches

Description:

Remove or Disconnect
1. Left sound insulator.
2. Pull switch rearward to remove from retainer in bracket
3. Wiring Harness connectors.

Install or Connect
1. Wiring harness to switch.
2. Retainer into bracket (from forward side).
3. With brake or clutch pedal depressed, insert switch into retainer until switch seats on retainer.

Adjust
a. Pull brake or clutch pedal fully rearward against pedal stop until audible "clicks" can not be heard.
b. Switch will be moved in retainer providing adjustment.
c. Release brake or clutch pedal and repeat Step "a" to assure that switch is properly adjusted.
4. Wiring harness connector(s).
5. Sound insulator.