Tilt Spring - Floor Shift

REMOVE OR DISCONNECT
1. Tilt column to "UP" position.
2. Spring retainer (50).
^ Using a cross recess screwdriver, push retainer down and turn counterclockwise to release.
3. Wheel tilt spring (47) and spring guide (46).

INSTALL OR CONNECT

NOTICE: Always use the correct fastener in the proper location. When you replace a fastener, use ONLY the exact part number for that application. The manufacturer will call out those fasteners that require thread lockers or thread sealant. UNLESS OTHERWISE SPECIFIED, do not use supplemental coatings (paints, greases, or other corrosion inhibitors) on threaded fasteners or fastener joint interfaces. Generally, such coatings adversely affect the fastener torque and the joint clamping force, and may damage the fastener. When you install fasteners, use the correct tightening sequence and specifications. Following these instructions can help you avoid damage to parks and systems. Failure to do may result in component damage or malfunction of steering column.

1. Spring guide (46) to wheel tilt spring (47).
^ Lubricate with lithium grease.
2. Spring retainer (50).
^ Using a cross recess screwdriver push retainer down and turn clockwise to lock in place.