Torque Convertor and Turbine Shaft Seal

REMOVE OR DISCONNECT
1. Remove negative battery cable.
2. Remove transaxle assembly from vehicle. See "Transaxle Assembly".
3. Remove the torque convertor assembly from the transaxle.
4. Remove the turbine shaft O-ring from the end of the turbine shaft using a screw driver.

INSTALL OR CONNECT
1. Assemble a new turbine shaft O-ring on the end of the turbine shaft.
2. Install the torque convertor onto the transaxle.
3. Install the transaxle into the vehicle. See "Transaxle Assembly".
4. Connect negative battery cable.

Adjust
- Oil level, refer to "Transaxle Oil Level Checking Procedure."