Seals and Gaskets: Service and Repair

^ Tools Required:
- J 26938 Seal Installer
- J 8092 Driver Handle

REMOVE OR DISCONNECT
1. Negative battery cable.
2. Raise the vehicle.
3. Tire and wheel assembly.
4. Stabilizer shaft from the control arm.
5. Ball joint from the steering knuckle.
6. Drive axle from:
- Left oil seal - transaxle.
- Right oil seal - intermediate shaft.
7. Intermediate shaft.
8. Drive axle oil seal.
- Fill between the seal lips with chassis grease GM P/N 1051344 or equivalent.

INSTALL OR CONNECT
1. Drive axle oil seal with J 26938 and J 8092.
2. Intermediate shaft (Right Only).
3. Drive axle.
4. Ball joint to steering knuckle.
5. Stabilizer shaft.
6. Tire and wheel assembly.
7. Lower vehicle.
8. Negative battery cable.