Shift Control

REMOVE OR DISCONNECT
1. Negative battery cable.
2. Knob, shift boot, and console. Refer to Body and Frame.
3. Shift cables from the pin on the shift control.
4. Spring clip holding the cables to the shift control.
5. Shift control.

INSTALL OR CONNECT
1. Shift control.

Tighten
- Control mounting nuts to 25 N.m (18 lb. ft.).

2. Cables to the pin on the shift control.
3. Spring clip that holds the cables to the shift control.
4. Console, shift boot, and knob. Refer to Body and Frame.
5. Negative battery cable.