Component Tests and General Diagnostics

PERFORM BEFORE BEGINNING SYSTEM DIAGNOSIS:
1. Check RR Defog Fuse and the HVAC Fuse.
2. Refer to repair Procedures If one or more of the grid lines do not heat.
3. If the Panel Light is inoperable with the Headlamp Switch in "PARK" or "HEAD," check bulb and wiring to bulb (CKT 8 - Power, CKT 150. Ground).
^ Refer to Wiper and Washer Systems for Wiper/Washer Switch access. Wiper and Washer Systems
^ Check for a broken (or partially broken) wire inside of the insulation which could cause system failure but prove "GOOD" in a continuity/voltage check (refer to "General Troubleshooting Procedures,"). Diagnostic Aids
^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems (refer to "General Troubleshooting Procedures,").
^ Refer to "System Diagnosis".