Troubleshooting Hints

Wiring Diagram:

^ Make the following checks before beginning System Diagnosis.
1. Check wiper fuse. If open, check for short to ground through CKT 143 and replace fuse.
2. Check that all system connectors are mated firmly.
3. If washer does not operate, check that:
- Washer solvent container is filled.
- Hoses are correctly attached.
- Hoses are not cut, kinked, or pinched.
- Nozzles are not clogged.
- Connector seal at washer pump is not damaged or missing.
4. Check for binding or broken wiper arm transmission.
^ Refer to System Diagnosis.