Brake Light Switch: Adjustments

REMOVAL PROCEDURE





1. Remove the driver side sound insulator.
2. Remove the electrical connection.
3. Disconnect the brake switch retainer (2), grasping and turning 90 degrees counter clockwise and pulling towards the rear of the vehicle.

INSTALLATION PROCEDURE





1. Insert the stop lamp switch (2) into the retainer until the switch body seats on the retainer.
2. Pull the brake pedal (3) upward against the internal pedal stop.
3. Turn the switch 90 degrees clockwise in order to lock into position.
4. Install the electrical connection.
5. Install the drivers side sound insulator.