Crankshaft, Engine
| Crankshaft Main Bearing Cap Bolt Tighten the crankshaft main bearing cap bolts in equal increments. Do not completely tighten one bolt at a time to prevent the cap from being cocked. | Step 1 | 52 Foot Pound-Force (ft.lb) |
| Step 2 | Loosen Bolts 360 Degrees | |
| Step 3 | 15 Foot Pound-Force (ft.lb) + 40 Degrees | |
| Step 4 | 110 Degrees Use J36660 to tighten the bolts in steps: 35 degrees + 35 degrees + 40 degrees for a total of 110 degrees. | |
| Crankshaft Main Bearing Cap Bolt (Side) | 11 Foot Pound-Force (ft.lb) + 45 Degrees | |
| Main Journal Diameter-All | 2.4988 - 2.4998 Inch (in) | |
| Rod Journal Diameter-All | 2.2487 - 2.2499 Inch (in) | |
| Main Journal Taper-Maximum | 0.00035 Inch (in) | |
| Rod Journal Taper-Maximum | 0..00035 Inch (in) | |
| Main Journal Out-Of-Round Maximum | 0.00025 Inch (in) | |
| Rod Journal Out-Of-Round Maximum | 0.00020 Inch (in) | |
| Main Bearing To Journal Clearance 1 | 0.0007 - 0.0016 Inch (in) | |
| Main Bearing To Journal Clearance 2, 3, And 4 | 0.0009 - 0.0018 Inch (in) | |
| Rod Bearing Clearance | 0.0005 - 0.0026 Inch (in) | |
| Crankshaft End Play | 0.003 - 0.011 Inch (in) |