| Crankshaft Bearing Cap Bolts | Step 1 (Inner M10) | 15 |
| Step 2 (Inner M10) | 80 deg |
| Step 3 (Outer M10) | 15 |
| Step 4 (Outer M10) | 53 Degrees |
| Crankshaft Bearing Cap Side Bolts | | 18 |
| Crankshaft Oil Deflector Nuts | | 18 |
| Crankshaft Bearing Clearance (Production) | | 0.0007 - 0.00212 |
| Crankshaft Connecting Rod Journal Diameter | Production | 2.0991 - 2.0999 |
| Service Limit | 2.0987 |
| Crankshaft Connecting Rod Journal Taper | Production Maximum For 1/2 The Journal Length | 0.0002 |
| Service Limit Maximum | 0.00078 |
| Crankshaft Connecting Rod Jorunal Out-Of-Round | Production | 0.00019 |
| Service Limit | 0.00039 |
| Crankshaft End Play | | 0.0015 - 0.0078 |
| Crankshaft Main Journal Diameter | Production | 2.558 - 2.559 |
| Service Limit Minimum | 2.558 |
| Crankshaft Main Journal Out-Of-Round | Production | 0.000118 |
| Service Limit | 0.00031 |
| Crankshaft Main Journal Taper | Production | 0.00039 |
| Service Limit | 0.00078 |
| Crankshaft Reluctor Ring Runout | Measured 1.0 mm (0.04 in) Below The Tooth Diameter | 0.01 |
| Crankshaft Runout (At Rear Flange) | | 0.01 |
| Crankshaft Thrust Wall Runout | | 0.001 |
| Crankshaft Thrust Wall Width | Production | 1.029 - 1.032 |
| Service Limit Maximum | 1.036 |