Feature Customization
IMPORTANT: If the ignition switch is moved to the OFF position during in the customization procedure, the theft deterrent/shock sensor customization procedure will be terminated. The system will remain in the most recent mode.1. Remove the MALL PGM fuse from the fuse panel.
2. Turn the ignition to the ACC position. The chime will sound 1-4 time in order to indicate which BCM version is installed on the vehicle.
3. Turn the park lamp switch to the ON position and back to the OFF position.
The seatbelt indicator flashes and the chime sounds 1-4 time . These actions indicate which mode the vehicle is in.
4. The mode number advances each time that the park lamp switch is turned ON. A transition part mode 4 will repeat, starting again at mode 1. Complete the following steps in order to exit and save the current customization:
4.1. Turn the ignition OFF.
4.2. Customize any other features.
4.3. Replace the MALL PGM fuse back into the fuse panel.