Theft Deterrent Arm/Disarm Customization
Feature Customization:
IMPORTANT: If the ignition switch is moved to the OFF position during the customization procedure, the theft deterrent arm/disarm customization procedure will be terminated. The system will remain in the most recent mode.
To customize the theft deterrent arm/disarm control features:
1. Remove the MALL PGM fuse from the fuse panel.
2. Turn the ignition to the ACC position. The chime will sound 1-4 time in order to indicate which BCM version is installed on the vehicle.
3. Insert the door lock key into the door lock cylinder.
4. Rotate and leave the key in the UNLOCK position.
5. Press the transmitter alarm button. The seatbelt indicator flashes and the chime sounds 1-4 time These actions indicate which mode the vehicle is in.
6. The mode number advances each time that the transmitter alarm button is pressed. A transition part mode 3 will repeat, starting again at mode 1. Complete the following steps in order to exit and save the current customization:
6.1. Turn the ignition OFF.
6.2. Customize any other features.
6.3. Replace the MALL PGM fuse back into the fuse panel.