Window Run Channel Replacement - Front Door

REMOVAL PROCEDURE




1. Remove the trim panel.
2. Remove the water deflector.
3. Remove the front window channel screw.
4. Unsnap the clip at the top edge of the channel.
5. Remove the front window channel from the door.

INSTALLATION PROCEDURE




1. Install the front window channel to the door.
2. Snap the clip together at the top edge of the channel.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the front window channel screw.

Tighten
Tighten the front window channel screw to 1.5 N.m (13 lb in).

4. Install the water deflector.
5. Install the trim panel.